ViewSonic G-Tablet – Themeing TNT Lite v4.51









         Posted by: justin  in  ViewSonic G-Tab ViewSonic GTablet  on Oct 15, 2011    
 

Here’s is everything you will need for all the upcoming G-Tablet themes that will soon be appearing on Droidpirate.com. First off this WILL ONLY WORK on TNT Lite v4.51 – other ROMs you will brick your device instantly. It is not supported for other framework files on different custom ROMs or the stock TAP ‘n’ TAP ROM. I cannot stress this enough, if you had problems installing TNT Lite v4.51 then this might not be for you because you can easily brick your device if you do not follow the instructions very carefully.

Essentials You Need:
- First like everything you will need TNT Lite v4.51 installed on your G-Tab – (Click here for more info)
- Next you will need ROOT access without it, it simply will not work (Click here for more info)
- You will then need LauncherPro it isn’t a must but everything was created with LauncherPro installed on my G-Tab (Click here for more info)

- Now you need to download the (2) files below, please note that these are .ZIP files so you need to extract them on your computer first using WinZIP, WinRAR or 7ZIP. Now that you have extracted the files you should see that they are (.APK) extensions. Connect your g-tablet to your computer and access the SD-Card and copy both APK files to your SD.

Download BusyBox Installer
Download MetaMorph Installed

Now that both files have been pushed to your SD-Card we now need to install them on the G-Tablet device. Since your on TNT you should have a file manager called “iFileManager“. Open it.

Find the BusyBox and MetaMorph v1.9.9 you copied earlier and Install both of them by clicking on them. After you installed both of the items, you need to go to your application drawer and Open the BusyBox application like shown in the screenshots below:

Choose “Install” let BusyBox do it’s thing it should take a few minutes for it to fully installed. You’re almost ready to start themeing!

Next Connect your G-Tablet back to your PC and enable Mass Storage, so you can create one more folder on your devices SD-Card. Open the SD-Card folder on your PC, you should be at the ROOT directory. You need to create a folder called “AndroidThemes” it has to be formatted just like that, this is where you will be placing all the MetaMorph .zip files that you are going to use in MetaMorph to theme your G-Tab.

So now to test it you can download this file below that will change your WiFi Notification indicator to Green.
- Download G-Tablet WiFi Green MetaMorph

Take the .zip file you just downloaded DO NOT EXTRACT THE .ZIP, just copy it directly to your “AndroidThemes” folder. Now disable your USB Storage in the notification area. If your gtablet is still connected to your computer than MetaMorph will not be able to recognize the SD-Card.

Now open up the MetaMorph application that you downloaded/installed on your device earlier.

Choose “Unzip/Extract New Theme

Now Choose the file you downloaded above called “G-Tablet-WiFi-Lime.zip

You will see a notification similar to the one above just letting you know what file you are installing. Click on “Close“.

You will now see a warning that the file is going to modify system files on your device. Choose “OK“.

MetaMorph will now be applying the theme to your G-Tablet, your device will also ask you to Reboot Choose “Yes”, your device may reboot automatically which is also normal. Right after it turns back on you should notice your WiFi Indicator has now been replaced just like the screen shot shown below.




    Leave a Comment