I’ve been getting a few requests to place a flashable version of the Stock UI (user interface) of the stock Tap ‘N Tap ROM that comes preloaded on the ViewSonic G-Tablet. This is for users who are selling their GTab or returning their G-Tab and want it completely clean/wiped with the stock user interface installed.

When I first purchased my G-Tablet it was a very crappy looking interface and you couldn’t do much you had 5 screens that showed your “Weather, News, Stocks, Email, etc”. When I saw the updates that Tap ‘N Tap actually released for their GTab I was sort of impressed a little laggy but does the job you can actually get to the Android market place and all of the features that a tablet should have not sure why they didn’t release this at the launch. Anyways for everyone requesting this here you go; it’s a very simple and straight forward install.

Installing via APX/NVFlash:
Step 1. Download the file below
Step 2. Unzip the contents of the .zip file (make sure everything stays in the same directory)
Step 3. Connect your Gtablet via USB to your computer
Step 4. Completely power off your device, once turned off press and hold (volume – *minus*) and hold the power, you should see your screen flicker and you should your computer recognize a USB device.
Step 5. Run the .BAT file that you extracted earlier
Step 6. Sit back let the batch file complete, once rebooted you should now be running the stock UI of Tap ‘n’ Tap.

Installing via update.zip (ClockWorkRecovery):
Step 1. Place the tapntap update.zip file on the root of the SD card.
Step 2. Boot into the ClockworkMod Recovery.
Step 3. Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Step 4. Select the option to Wipe data/factory reset.
Step 5. Then select the option to Wipe cache partition.
Step 6. Select Install zip from sdcard.
Step 7. Select Choose zip from sdcard.
Step 8. Select the tapntap update.zip.

•